How to make an Air Compressor From an Old Refrigerator
How often do you find yourself in a situation where your air compressor breaks and you have to wait for a repairman to come by and fix it?
Wouldn’t it be great if you were able to make an air compressor on your own that would last longer than the average refrigerator or computer?
how to make an air compressor with a fridge.
Step one: Obtain a refrigerator, an air compressor kit, and the necessary tools to install it.
You will also need a drill, wrenches (various sizes), electrical tape, two female connectors for tubing between the fridge and compressor(to hold bolts in place), and sheet metal screws with washers to attach your new cabinet doors.
Air compressors are vital pieces of equipment in any garage or workshop. They power pneumatic hand tools such as drills, nail guns, and sanders which allow you to work faster than if they were powered by electricity alone.
Air compressors can be bought brand new but these tend to break often because nothing is better at breaking things down quickly than time itself! Luckily, they can also be bought used for a fraction of the cost.
There are three things that you need to identify before buying an air compressor:
voltage, capacity, and horsepower. air compressor and jump starter Voltage is typically 115 VAC or 230VAC while capacity refers to how much air it pumps in cubic feet per minute (CFM).
Horsepower indicates how powerful the motor inside your newfound treasure will be and ranges from one-half HP up to five or more HP. Air compressors with lower capacities tend to have lower horsepower motors but higher CFMs which makes them perfect for smaller jobs where there’s not as high demand on the equipment so you won’t spend hours waiting around for enough pressure to build up if you’re using something like a nail gun.
How do I choose the right air compressor?
In summary, you should figure out what voltage and capacity your air compressor needs to have before buying one.
You also want to make sure that the horsepower is enough for your specific project: if it’s a small job with little demand on the machine then get something smaller. If it’s a bigger job or you need more pressure for heavier equipment like nail guns, find an air compressor with higher HPs. After this quick guide, figuring out how to choose the right air compressor will be easier than ever!
FAQs
Q. Isn’t a refrigerator too big for this project?
A. Not if you take out the compressor and condenser coils! This is one of the most common questions we get because people assume that’s all there is to an air compressor, but fortunately, it isn’t so easy.
Q. Can I do anything else with my old fridge besides converting it into an air compressor?
A. Yup! There are tons of other uses for your junked up appliance: from turning it into a makeshift ice machine or home-brewing beer keg to using the copper tubing inside as emergency plumbing pipe, there’s no reason why you can’t make use of every last scrap after converting your old refrigerator into an air compressor!”
Q. I don’t have a compressor, can I use canned air instead?
A. No! Canned air is usually used for cleaning electronics and small parts like keyboards or mice.
It’s not powerful enough to drive the piston in an air compressor, so it won’t work properly as an alternative method of powering the mechanical process that forces compressed air into your tires.”
Q. What are some other benefits besides saving money?
A. Besides saving tons on buying a new one from the store, you’re also recycling which is good for our planet!
Be sure to read this article before getting started it has all sorts of tips about converting your refrigerator into an awesome little machine capable of pumping up those flat bicycle tires with just a few strokes!
Q. Why not just buy a used one for cheap?
A. Getting an old refrigerator and converting it into an air compressor is way cheaper than buying a new one from the store. If you’re handy with tools, this project might be right up your alley.”
Q. I use canned air instead?
A. No! Canned air is usually used to clean electronics and small parts like keyboards or mice. It’s not powerful enough to drive the piston in an air compressor, so it won’t work properly as an alternative method of powering the mechanical process that forces compressed air into your tires.
Q. What are some other benefits besides saving money?
A. We can also say that we’re helping the environment by not buying a new machine, and there are plenty of other people who have done this too!
In addition to saving money every time you pump up your tires, you’ll be able to use it for all sorts of things around the house like cleaning your keyboard or blowing air into electronic parts!
Q. Build Your Own Air Compressor For a Fraction of The Cost!
A. This is how I converted an old refrigerator’s compressor (which still works) into my own little machine capable of pumping up those flat bicycle tires with just a few strokes! If you’re handy with tools, this project might be right up your alley.
Conclusion
So for a fraction of the cost, you’ll be able to say that not only did you save money every time you pump up your tires but also helped the environment by avoiding using another machine.
Plus there are plenty more benefits like being able to use it for all sorts of things around the house!
