5 DIY Ways to Repair Your Refrigerator
Refrigerator issues occur at the worst times. There you are, relaxing and thinking you’ll enjoy a nice drink, but once you open up the fridge, everything is warmer than expected. What’s the issue? And how can you save your food and beverages before it goes bad? Now is the time to swing into action.
Fortunately, there are multiple refrigerator repair techniques that can get your refrigerator running up again. We suggest using this guide to help you identify the issue, and then see if you can fix the appliance on your own.
Check Your Power Cord
While this sounds basic, making sure that the appliance’s electricity is on is the first step. Check to see if the cord is plugged in tightly and hasn’t been loosened by the compressor’s vibration over time.
If the plug is loose, replace the wall receptacle. This will ensure that it fits to your device, ensuring that it runs smoothly.
Check the Circuit Breaker
If the power cord isn’t the root cause of your issues, check your electrical panel to see if the beaker hasn’t tripped. You can determine this if the black switch is on the “off” position. Listen to the device’s humming to indicate that it’s receiving power.
Test the Outlet
If the refrigerator is still having problems, you can use a receptacle tester or multimeter to determine if electricity is flowing through the outlet. If not, you should consult an electrician to fix the home wiring.
In the meantime, try using the fridge on another outlet to continue to cool your food and beverages while you wait for refrigerator repair help.
Check Your Thermostat
If the refrigerator is generating power but is having a hard time cooling, then you should check the thermostat. It’s easier than you think to press a button for the temperature to increase, so you can reset the temperature until it reaches the desired range and closes the refrigerator up.
If your compressor is running constantly, but the temperature isn’t stable, then it could be a problem with your cooling system or seal in general.
Test the Seal
If your refrigerator has a loose door seal, cold air will come out of the fridge and will cause the compressor to run constantly to stay cool. Test your door seal by putting a piece of paper partially in the door before closing them.
Next, you should tug on the paper: If you feel some tension and find that it’s hard to remove, the seal is working properly. However, if it slides out easily, the door gasket has to be replaced. Make sure to test all sides to see if the seal is shut tightly.
Conclusion
If these options fail to work, then consider getting a refrigerator repair specialist to assist you. But try to solve the issue on your own to reduce the total charge for repairs. Through doing some of these DIY methods, you can find quick solutions to your appliances and ensure that they are working properly.
Do you have any questions about repairing refrigerators?
Tell us in the comments below.
